Viktoria Washing Machine

1. Before dyeing, remove stains on the clothes. This enables to have straight color results while dyeing. Wash the prewashing item with warm and soapy water. This helps to remove all surfaces which may prevent dye absorption.

2. Set the water temperature to the warmest possible and realize a washing cycle of at least 30 minutes or longer. The longer the product is in the paint, the darker the colors. The longer the product stays in the dye, the darker the colors.

3. Wear rubber gloves, mix Viktoria Fabric Dye with very hot water in a plastic container. Melt well.

4. If you are dyeing natural fibers such as cotton or linen, dissolve one cup of salt in four cups of very hot water in a separate container. If you are dyeing silk or nylon, mix two to four cups of hot tap water with one cup vinegar.

5. Add a tea spoon of dishwashing liquid to support level dyeing.

6. Start the cycle.

7. Cast the dye solution into the distributor. Then cast salt or vinegar solution. Wash the distributor duly with four cups of hot tap water.

8. To boost color and reduce dye bleeding, cast the Fiske Fabric Dye Stabilizer into the softener section. Use one packet flick for one pack Viktoria.

9. Wash the item again with warm water and mild detergent.

10. To clean washing machine: Wipe the inside of the cover and cast some bleach from the internal distributor (if any) as dyes may enter these areas. Then fill the washer to the highest water level and select the hottest water temperature setting. Add two cups of chloric bleach and detergent and realize a washing cycle with three old towels.

How to Paint?